Ikra IPCS 46 - Technical Specifications; Power Unit Technical Data; Cutting Attachment Details; EC Conformity Declaration

GB | Operating Instructions
17
15. Specications IPCS 46
15. EC Declaration of Conformity
We, Ikra GmbH, Schlesierstraße 36, 64839 D-Münster, Germany, declare under our sole responsibility that the
product Petrol Chainsaw IPCS 46, to which this declaration relates correspond to the relevant basic safety and
health requirements of Directives 2006/42/EC (Machinery Directive), 2004/108/EC (EMC-Guideline), 97/68/EC (Ex-
haust Emission Directive) as amended by 2011/88/EU and 2000/14/EC (noise directive) incl. modications. For the
relevant implementation of the safety and health requirements mentioned in the Directives, the following standards
and/or technical specication(s) have been respected:
EN ISO 11681-1:2011, EN ISO 14982:2009
Type examination certicate No. 13SHW1731-01, Intertek Notied Body 0905
Sound power level L
WA
110.6 dB(A) k=3.0 dB(A)
Guaranteed sound power level L
WA
114,0 dB (A)
Conformity assessment method to annexe V / Directive 2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally retrieved via the consecutive serial number
Münster, 10.09.2013
Gerhard Knorr, Technical Management Ikra GmbH
Maintenance of technical documentation: Gerhard Knorr, Kärcherstraße 57, DE-64839 Münster
Attention! This chain saw is only designed for the cutting of wood!
16. EC Declaration of Conformity
Power unit:
Displacement 45,8 cc
Maximum engine power 1.8 kW
Fuel Mixture (Unleaded Gasoline 40 : two-cycle oil 1)
Fuel tank capacity 550 ml
Oil tank capacity 260 ml
Carburetor Diaphragm type
Fuel consumption at maximum engine power 560 g/kwh
Idling speed 3000±300 min
-1
Maximum speed with cutting attachment 11000 min
-1
Maximum Chain speed 24,4 m/s
Ignition system C.D.I.
Spark plug NHSP LD L8RTF / CDK L7RTC
Oil feeding system Mechanical plunger pump with adjuster
Sprocket Teeth x Pitch 7T × 0.375 in
Dry weight (empty tanks) 5.5 kg
Sound pressure level (2000/14/EG) 101,0 dB(A) K=3,0 dB(A)
Sound power level (2000/14/EC)
114,0 dB(A)
Vibration Value
Front handle 7,1 m/s
2
K=1,5 m/s
2
(EN ISO 11681-1:2011)
Rear handle 12,3 m/s
2
K=1,5 m/s
2
(EN ISO 11681-1:2011)
Cutting attachment:
Guide bar
Type 180SDEA095 Oregon / 180SCEA095 Oregon
Size 450 mm / 18 inch
Cutting length 415 mm / 16.3 inch
Saw chain
Type Oregon 91P061X
Pitch 0.375 inch
Gauge 1,3 mm / 0.0512 inch
Specications are subject to change without notice