illy X7.1 User Manual






   

󲄂󰿿
󲄂󱀀
󲄂󱀁
󲄂󱀂
󲄂󱀃
󲄂󱀄
󲄂󱀅
󲄂
󲄂󱀆󱀇

󲄂
󲄂


󲄂






23
EN
The descaling solution must be disposed of in accordance
with the applicable laws and regulations.
CLEANING AND MAINTENANCE
The machine and its components must be cleaned at least
once a week.
Keep the water in the tank fresh; wash the tank and fi ll it daily
with fresh drinking water.
Do not use ethyl alcohol, solvents, abrasive sponges and/or
aggressive chemicals.
Caution: do not dry the machine and/or it components in a
microwave or conventional oven.
To clean the machine, carry out the following steps:
Switch the machine off and discon-
nect the plug from the power
outlet.
Remove the water tank and wash it
under running water.
Empty out the capsule holder and
wash it under running water.
- Remove the grill and wash it with warm water.
- Remove the drip tray and wash it with warm water.
- Remove the outer end part of the steam wand.
- Remove the inside part of the steam wand from the metal
tube.
- After separating the two components, wash them separately
with warm water.
- After washing the components fi t the inside part on the me-
tal tube and then fi t the outer part.
Note: when you refi t the inside and outer end parts of the steam
wand, make sure to push them up all the way.
23
EN
The descaling solution must be disposed of in accordance
with the applicable laws and regulations.
CLEANING AND MAINTENANCE
The machine and its components must be cleaned at least
once a week.
Keep the water in the tank fresh; wash the tank and fi ll it daily
with fresh drinking water.
Do not use ethyl alcohol, solvents, abrasive sponges and/or
aggressive chemicals.
Caution: do not dry the machine and/or it components in a
microwave or conventional oven.
To clean the machine, carry out the following steps:
Switch the machine off and discon-
nect the plug from the power
outlet.
Remove the water tank and wash it
under running water.
Empty out the capsule holder and
wash it under running water.
- Remove the grill and wash it with warm water.
- Remove the drip tray and wash it with warm water.
- Remove the outer end part of the steam wand.
- Remove the inside part of the steam wand from the metal
tube.
- After separating the two components, wash them separately
with warm water.
- After washing the components fi t the inside part on the me-
tal tube and then fi t the outer part.
Note: when you refi t the inside and outer end parts of the steam
wand, make sure to push them up all the way.
23
EN
The descaling solution must be disposed of in accordance
with the applicable laws and regulations.
CLEANING AND MAINTENANCE
The machine and its components must be cleaned at least
once a week.
Keep the water in the tank fresh; wash the tank and fi ll it daily
with fresh drinking water.
Do not use ethyl alcohol, solvents, abrasive sponges and/or
aggressive chemicals.
Caution: do not dry the machine and/or it components in a
microwave or conventional oven.
To clean the machine, carry out the following steps:
Switch the machine off and discon-
nect the plug from the power
outlet.
Remove the water tank and wash it
under running water.
Empty out the capsule holder and
wash it under running water.
- Remove the grill and wash it with warm water.
- Remove the drip tray and wash it with warm water.
- Remove the outer end part of the steam wand.
- Remove the inside part of the steam wand from the metal
tube.
- After separating the two components, wash them separately
with warm water.
- After washing the components fi t the inside part on the me-
tal tube and then fi t the outer part.
Note: when you refi t the inside and outer end parts of the steam
wand, make sure to push them up all the way.
23
EN
The descaling solution must be disposed of in accordance
with the applicable laws and regulations.
CLEANING AND MAINTENANCE
The machine and its components must be cleaned at least
once a week.
Keep the water in the tank fresh; wash the tank and fi ll it daily
with fresh drinking water.
Do not use ethyl alcohol, solvents, abrasive sponges and/or
aggressive chemicals.
Caution: do not dry the machine and/or it components in a
microwave or conventional oven.
To clean the machine, carry out the following steps:
Switch the machine off and discon-
nect the plug from the power
outlet.
Remove the water tank and wash it
under running water.
Empty out the capsule holder and
wash it under running water.
- Remove the grill and wash it with warm water.
- Remove the drip tray and wash it with warm water.
- Remove the outer end part of the steam wand.
- Remove the inside part of the steam wand from the metal
tube.
- After separating the two components, wash them separately
with warm water.
- After washing the components fi t the inside part on the me-
tal tube and then fi t the outer part.
Note: when you refi t the inside and outer end parts of the steam
wand, make sure to push them up all the way.
23
EN
The descaling solution must be disposed of in accordance
with the applicable laws and regulations.
CLEANING AND MAINTENANCE
The machine and its components must be cleaned at least
once a week.
Keep the water in the tank fresh; wash the tank and fi ll it daily
with fresh drinking water.
Do not use ethyl alcohol, solvents, abrasive sponges and/or
aggressive chemicals.
Caution: do not dry the machine and/or it components in a
microwave or conventional oven.
To clean the machine, carry out the following steps:
Switch the machine off and discon-
nect the plug from the power
outlet.
Remove the water tank and wash it
under running water.
Empty out the capsule holder and
wash it under running water.
- Remove the grill and wash it with warm water.
- Remove the drip tray and wash it with warm water.
- Remove the outer end part of the steam wand.
- Remove the inside part of the steam wand from the metal
tube.
- After separating the two components, wash them separately
with warm water.
- After washing the components fi t the inside part on the me-
tal tube and then fi t the outer part.
Note: when you refi t the inside and outer end parts of the steam
wand, make sure to push them up all the way.
23
EN
The descaling solution must be disposed of in accordance
with the applicable laws and regulations.
CLEANING AND MAINTENANCE
The machine and its components must be cleaned at least
once a week.
Keep the water in the tank fresh; wash the tank and fi ll it daily
with fresh drinking water.
Do not use ethyl alcohol, solvents, abrasive sponges and/or
aggressive chemicals.
Caution: do not dry the machine and/or it components in a
microwave or conventional oven.
To clean the machine, carry out the following steps:
Switch the machine off and discon-
nect the plug from the power
outlet.
Remove the water tank and wash it
under running water.
Empty out the capsule holder and
wash it under running water.
- Remove the grill and wash it with warm water.
- Remove the drip tray and wash it with warm water.
- Remove the outer end part of the steam wand.
- Remove the inside part of the steam wand from the metal
tube.
- After separating the two components, wash them separately
with warm water.
- After washing the components fi t the inside part on the me-
tal tube and then fi t the outer part.
Note: when you refi t the inside and outer end parts of the steam
wand, make sure to push them up all the way.
󰿿
󱀅󱀄
󱀀
󱀆
󱀂
󱀁
󱀇
󱀃

illy X7.1 Specifications

General

Brand	illy
Model	X7.1
Category	Coffee Maker
Language	English