12
EN
PROGRAMMING THE QUANTITIES
1
2
3
4
Put a capsule in the provided space. Close the lever completely. Programming espresso:
Use the capsule shown in the figure. Press and
hold the button, the machine will start to
dispense coffee. Release the button once the
desired quantity is reached.
Programming brewed coffee:
Use the capsule shown in the figure.
Press and hold the button. The machine
will start delivering coffee. Release the button
once the desired quantity is reached.
Factory settings
Button Capsule Quantity Cup
Espresso:
medium roast,
dark roast,
decaf
approx. 25 ml
Long espresso
(blue capsule)
approx. 50 ml
Brewed coffee
approx. 220 ml
The machine is now programmed. The next time the or button is
pressed, the machine will dispense the quantity of coffee that was just stored.
HOW TO COME RETURN THE MACHINE TO THE FACTORY SETTINGS:
With the lever open, turn on the machine by pressing one of the two coffee buttons for
1-2 sec.
Press the
button 5 times within 15 seconds.
The
and buttons will flash quickly for 2 seconds and will then turn on fixed.
Now the machine has returned to the factory settings for both preparations, both for the
quantity as well as the temperature.
To Next Page
Loading...
