17
EN
DESCALING - PROBLEM - CAUSE - SOLUTION
PROBLEM CAUSE SOLUTION
The descaling/rinsing cycle is interrupted.
Power failure. When the power is restored, the cycle resumes automatically after the interruption.
The machine has been accidentally turned off. Turn the machine on again: the cycle resumes automatically after the interruption.
Opening the lever when the cycle has already
started.
Close the lever: the cycle resumes automatically after the interruption.
The machine does not brew water. The water tank is empty. Fill the water tank.
WARRANTY LIMITATIONS
CAUTION:
If descaling is not carried out regularly, limescale may cause malfunctions that are not covered by the warranty. Do not use vinegar, lye, salt or
formic acid as they may damage the machine. Use only descaling products suitable for coffee machines. The descaling solution must be disposed
of according to applicable regulations. Do not drink the liquid dispensed during the descaling process; the machine may not be used for brewing
coffee until after the descaling process has terminated.
The warranty does not cover failures caused by:
• A lack of periodical descaling.
• Operation at a voltage other than what is specified on the data plate.
• Misuse or failure to follow instructions.
• Changes made internally.
• The warranty does not cover repair costs for machines that have been tampered with by unauthorised service centres. Such costs will be entirely payable by the customer.
• Do not to wash the drip tray and the used capsule tray in the dishwasher machine. Failure to follow these instructions may cause problems to both components that are
not covered by the warranty.
CAUTION:
Saving the original packaging (at least over the warranty period) is advisable in the event that the machine needs to be sent to an authorised
service centre. Any damage caused due to transport without proper packaging is not covered by the warranty.
To Next Page
Loading...
