illy Y3.3 - Page 16

16
EN
5
5 sec.
6
7
8
Turn on the machine by pressing the button
for 5 seconds.
After 5 seconds the button will start
flashing. Release the button .
The
button flashes.
Press the button to start the descaling cycle.
The machine begins dispensing water.
At the end of the descaling cycle, the button
is steady on while the button is flashing.
Remove the container and empty it.
Wash the tank thoroughly and fill it with fresh
water.
Attach the tank containing fresh water (see
point 3).
Place a container of at least 0.75 litre capacity
under the dispensing spout.
Press the
button to start the rinse cycle. The
machine begins dispensing water.
9
10
At the end of the rinse cycle, the button and
the button flash simultaneously.
Remove the container and empty it.
Wait until the button and the button
become steady on.
The machine is now ready for use.