8
EN
MACHINE INSTALLATION AND STARTUP
When used for the first time, or if the machine has been turned off for a long period of time, wash the tank before filling it. Furthermore it is recommended to dispense at
least 3 mugs of water to rinse the internal machine circuits, proceeding as follows.
1 2 3 4
Remove the tank, pushing it downwards. Turn the tank outwards. Fill the tank with fresh water to the maximum
level.
Attach the tank containing the descaling
solution .
Make sure that the tank is completely engaged.
5
6
1-2 sec.
7
8
Connect the machine to the power outlet. Turn on the machine by pressing one of the two
coffee buttons for 1-2 sec.
Make sure there are no capsules in the machine.
The
and buttons will start to flash.
To Next Page
Loading...
