13
EN
PROGRAMMING THE TEMPERATURE
1
1-2 sec.
2
x 5
3
4
With the lever open, turn on the machine by
pressing one of the two coffee buttons for 1-2
sec.
Do not insert a capsule.
Press the button 5 times within 15 seconds
of turning on the machine. Both buttons will
flash. It is now possible to change the tempera-
ture as described in points 3 and 4.
Press the button to increase the tempera-
ture. The button flashes. Both buttons flash
after approx. 3 seconds.
Press the button
to decrease the tempera-
ture. The button flashes. Both buttons flash
after approx. 3 seconds.
The machine is now programmed. The next time the or button is
pressed, the coffee is dispensed at the temperature that was just stored.
HOW TO COME RETURN THE MACHINE TO THE FACTORY SETTINGS:
With the lever open, turn on the machine by pressing one of the two coffee buttons for
1-2 sec.
Press the
button 5 times within 15 seconds.
The
and buttons will flash quickly for 2 seconds and will then turn on fixed.
Now the machine has returned to the factory settings for both preparations, both for the
quantity as well as the temperature.
To Next Page
Loading...
