iLO IWT3206 - Audio and Volume Controls; Volume Adjustment; Mute Function; Audio Mode and Language Switching

16
EN
VOLUME ADJUSTMENT
This section describes how to adjust the volume
when viewing TV. The MUTE function, which is use-
ful when you have a visitor or a phone call, will be
also described.
1 Using [VOL
X
/
Y
]
• You can adjust the audio volume with [VOL
X
/
Y
].
• The volume bar is displayed at the bottom of
the screen when adjusting the volume.
• Same operation is available with
[VOL
X
/
Y
] on
the front panel of the main unit.
2 Using [MUTE]
• Press [MUTE] on the remote control to mute
the sound.
The colored volume bar is displayed on the
screen while muting.
• To release the MUTE status, press
[MUTE]
again or press [VOL
X
/
Y
].
VOLUME
VOLUME
123
456
789
0
+100
- /ENT
o
p
m
n
MUTE SLEEP
AUDIO
MENU
INFO INPUT
SELECT
DTV/TVPOWER
CH
VOL VOL
MUTE
VOL
X
/
Y
SWITCHING AUDIO
This section describes how to switch the audio in
the analog mode and how to switch the audio lan-
guage in the digital mode.
1 Switch the audio.
• Every time you press
[AUDIO], the audio will
be switched as below.
MAIN : Outputs main-audio
SAP : Outputs second audio channel
MONO : Outputs mono-audio
1 Switch the audio language.
• When you press
[AUDIO], the currently selected
language and the number of received languages
will be displayed on the screen.
• Every time you press
[AUDIO], the language
will be switched.
• Languages you can switch differ depending
on the receiving broadcast.
NOTE:
Even if you press [AUDIO] in external input, the audio will not
be switched.
KABC CH 95-03
Jay Jay the Jet Plane
Spanish 2/3 11:00AM- 1:00PM
KABC CH 95-03
Jay Jay the Jet Plane
English 1/3 11:00AM- 1:00PM
Audio
language
DTV
TV
789
0
+100
- /ENT
MUTE SLEEP
AUDIO
MENU
INFO INPUT
SELECT
AUDIO