iLO IWT3206 - Other Settings: Auto Channel Preset; TV;DTV Channel Presetting; CATV Channel Presetting

28
EN
4
For TV channels
• Using
[CH
K
/
L
], select
"AUTO PRESET CH(TV)".
• Press
[VOL
X
].
Scanning and memorizing the channels auto-
matically starts.
• When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
analog broadcasting will be displayed.
4 For CATV channels
• Using
[CH
K
/
L
], select "AUTO PRESET
CH(CATV)".
• Press
[VOL
X
].
Scanning and memorizing the channels auto-
matically starts.
• When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
CATV will be displayed.
AUTO PRESET CH(CATV)
ADD/DELETE
AUTO PRESET CH(TV)
AUTO PRESET CH(CATV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
AUTO PRESET CH(TV)
ADD/DELETE
AUTO PRESET CH(TV)
AUTO PRESET CH(CATV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
AUTO PRESET CH
If you switch wires (e.g. between antenna and
CATV) or if you move the TV to a different area
after the initial setting, you will need to perform
AUTO PRESET CH again. This function lets you
easily select the receivable channels with
[CH
K
/
L
]
and the TV memorizes them even if you switch
wires.
When scanning TV or CATV
1
Select analog mode by pressing [DTV/TV].
2 Display the menu screen.
• Press
[MENU].
The following menu screen is displayed.
3 Select "CHANNEL SET".
• Using
[CH
K
/
L
], select "CHANNEL SET".
• Press
[VOL
X
].
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
TV
NOTE:
• Make sure if the TV is connected to antenna or cable.
When aerial antenna is connected, select “AUTO PRE-
SET CH (TV)” or “(TV/DTV)” at step 4. When connected
to CATV, select “AUTO PRESET CH (CATV)”.
123
456
789
0
+100
- /ENT
o
p
m
n
MUTE SLEEP
AUDIO
MENU
INFO INPUT
SELECT
DTV/TVPOWER
CH
VOL VOL
MENU
DTV/TV
CH
K
/
L
VOL
X
O
THER SETTINGS