iLO IWT3206 - Switching External Input Sources; Input Source Selection

18
EN
SWITCHING EXTERNAL INPUT
When you connect external devices including a
video cassette recorder and home audio system,
you can easily switch the input mode with the
remote control.
1
Switch the input mode.
• When you press
[INPUT SELECT] on the
remote control, the input mode will be switched
as below.
• To use the VIDEO-1 INPUT jacks on the rear of
the TV, select "VIDEO1".
(If you use the S-VIDEO jack, "S-VIDEO" is dis-
played.)
• To use the jacks on the front of the TV, select
"VIDEO2".
• To use the COMPONENT VIDEO INPUT jacks
on the rear of the TV, select "COMPONENT".
123
456
789
0
+100
- /ENT
MUTE SLEEP
AUDIO
MENU
INFO INPUT
SELECT
INPUT SELECT
• When you press [INFO], the current external
input mode will be displayed at the top right of
the screen.
1) When using VIDEO-1 INPUT jack
2) When using VIDEO-2 INPUT jack
3) When using COMPONENT VIDEO INPUT
jack
4) When using S-VIDEO INPUT jack
S-VIDEO
COMPONENT
VIDEO 2
VIDEO 1