EasyManua.ls Logo

ILVE ILD88B - Automatic Cooking; Stop&Go Function

ILVE ILD88B
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
x Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer display blinks [ 00 ] and a sound rings.
To stop the sound and the blinking, press the key [ ].
x Egg timer function :
Example for 29 minutes :
Action Control panel Display
Activate the hob Press display [ ] Zone control lights are on
Select« Timer » Press display [ CL ] [ 00 ]
Set the units Slideonthe“SLIDER“to[9] [ 0 fixed ] [ 9 blinking ]
Valid the units Press display [ 09 ] [ 0 blinking ] [ 9 fixed ]
Set the tens Slideonthe“SLIDER“to[2] [ 2 blinking ] [ 9 fixed ]
Valid the tens Press display [ 29 ] [ 29 ]
After a few seconds, control light stops with blinking.
As soon as the selected cooking time is finished the timer display blinks [ 00 ] and a sound rings.
To stop the sound and the blinking, press the display [ 00 ]. The hob turns off.
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power for a certain time, and will then reduce automatically the power on the pre-selected
level.
x Start-up :
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Full power setting Slideonthe“SLIDER“to[9] Pass from [ 0 ] to [ 9 ]
Automatic cooking Re-pressondisplay“SLIDER“[9] [ 9 ] is blinking with [ A ]
Power level selection Slideonthe“SLIDER“to[7] [ 9 ] pass to [ 8 ] [ 7 ]
(for example « 7 ») [ 7 ] is blinking with [ A ]
x Switching off the automatic cooking :
Action Control panel Display
Zone selection Press [ 7 ] from the zone [ 7 ] blinking with [ A ]
Power level selection Slideonthe“SLIDER“ [ 1 ] to [ 9 ]
Stop&Go function
This function stops all the hob’s cooking temporarily and then allows restarting with the same
settings.
x Startup/stop the pause function :
Action Control panel Display
Engage pause press [ ll ] key displays [ II ] in the
during 2s heating zone displays
Stop the pause press [ ll ] key pause control light is
during 2s blinking
press an other touch or pause control light is off
slide on the“SLIDER“

Related product manuals