iM3 Elite - High Speed Handpiece - LED Advantage HS HP L5200 s; Bur Replacement - iPush Tool

14
High Speed Handpiece - LED Advantage HS HP L5200s
The High Speed Handpiece is designed to operate at a pressure of 40 psi at the handpiece
and at speeds of up to 400,000 rpm. A very light touch is necessary as handpieces
operates with very low torque and high speed. Pressure on the handpiece of 30gms
(1ounce) or more, will cause the bur to stall.
Note: All handpieces should be lubricated prior to use with iM3 MD-30
Bur Replacement - iPush Tool (iM3 ordering code L7050)
Follow the instruction below to fit and use the tool on the handpiece.
iM3 Dental Systems
1. Place the iPush onto the LED Advantage
handpiece.
2. Depress the lever with your thumb and in-
sert the bur all the way until it stops.
3. Remove the iPush before using the Hand-
piece.
4. To change the Bur repeat step 2. and re-
move the Bur.
To increase the life of the Handpiece,
Oil between each use and use a brand
new Bur between each patient. See
Handpiece manual.
Dental Burs should be discarded between patients. A brand new bur
should be used for each procedure.