16
iM3 Dental System Bur Kits
There are four bur kits in the iM3 range, the FG (Friction Grip), FG Cats, RA (Right Angle) and
HP (Handpiece Burs). Each kit contains 10 burs of various sizes and applications andcomes
complete with a suggested application guide. Each bur has been selected by a specialist vet-
erinary dentist and carries individual re-order codes and can be ordered in packs of six. iM3
also produces a soft tissue kit ideal for rabbits.
iM3 Handpiece Pressure Adjustment
Handpiece Pressure Adjustment
The high and low speed handpieces should be set to a specific pressure. The handpiece pressure
adjustment is located underneath each handpiece holder. It is a silver knurled knob.
Turn the unit on and remove the handpiece to be adjusted. Depress the foot pedal and turn the
knurled knob located under the handpiece holders. Adjust until the desired pressure is displayed on
the handpiece pressure gauge by turning the knob clockwise or anti-clockwise.
PRESSURE IS READ
ON THE HANDPIECE PRESSURE GAUGE
Low Speed
Handpiece 35-40 psi*
High Speed LED
Handpiece 40 psi*
Please check with the handpiece manufacturer regarding specific operational pressures.
NOTE: Check the pressure on the Compressor Regulator is set at 80psi.
iM3 Dental Systems
High speed
handpiece holder
Low speed
handpiece holder
High speed pressure
adjuster underneath
unit
Low speed pressure
adjuster underneath
unit
To Next Page
Loading...
Need help?
General
