17
iM3 Dental Systems
Lubrication of HS & LS Handpieces L5200 & L6200
Refer to separate handpiece manual.
All handpieces should be lubricated regularly. We recommend the use of MD-30
handpiece oil
before use and after 30 minutes of running time.
The foot pedal should be depressed for 30 seconds after oiling to ensure
the lubricant will reach the turbines and working portions of the handpiece.
The lubricant is placed in the smaller of the 2 large holes.
“Air entry hole” at the base of the handpiece.
NOTE:
DON’T FORGET TO DEPRESS
THE FOOT CONTROL AFTER
OILING TO ENSURE LUBRICANT
REACHES THE TURBINES.
Maintenance instructions are printed on
the back of the dental machine
To Next Page
Loading...