PAGE
SECTION 1:
IMPORTANT INFORMATION 1-1
A. RECEIVING AND HANDLING 1-1
B. SAFETY PRECAUTIONS 1-1
SECTION 2: SPECIFICATIONS / COMPONENT IDENTIFICATION 2-1
A. TECHNICAL SPECIFICATIONS 2-1
B. TECHNICAL DIMENSION 2-2
C. COMPONENT IDENTIFICATION 2-5
SECTION 3: INSTALLATION PROCEDURES 3-1
A. LOCATION REQUIREMENTS 3-1
B. UNPACKG / SETTING UP 3-2
C. DRYER ENCLOSUE REQUIREMENTS 3-2
D. FRSH AIR SUPPLY 3-3
E. EXHAUST REQUIREMENTS 3-4
F. ELECTRICAL INFORRMATION 3-10
G. GAS INFORMATION 3-16
H. STEAM INFORMATION 3-19
I. PREPARATION FOR OPERTION / START UP 3-22
J. PRE - OPERATIONAL TESTS 3-23
SECTION 4: OPERATING AND PROGRAMMING INSTRUCTIONS 4-1
A. OPERATING INSTRUCTIONS 4-1
B. SHUTDOWN INSTRUCTIONS 4-2
C. SETTING THE PROGRAM
4-3
D. SETTING THE CONTROLLER 4-4
E. MEANING OF THE ALARM MASSAGES
4-4
SECTION 5: WARRANTY INFORMATION 5-1
A. RETURNING WARRANTY CARD(S) 5-1
B. WARRANTY 5-1
C. RETURNING WARRANTY PART(S) 5-1
SECTION 6: ROUTINE MAINTENANCE 6-1
A. CLEANING 6-1
B. ADJUSTMENTS 6-2
C. LUBRICATION 6-2
SECTION 7: TROUBLE SHOOTING 7-1
A. MICROPROCESSOR MODELS 7-1
B. TIMER MODELS 7-5
SECTION 8: SERVICE / PART INFORMATION
A. SERVICE
B. PARTS LIST
To Next Page
Loading...
