Page 12 of 14
Other than regular cleaning the MF-Range peelers require no maintenance by the end
user. It is recommended that the unit is serviced by a Lincat approved engineer at least
once a year.
Details of Lincat Service Contracts are available on application.
DO’S AND DON’TS
Do Install on a level service.
Do Ensure power supply isolator is accessible with the peeler installed.
Do Clean the machine after use.
Don’t Sit or stand on top of the peeler.
Don’t Place hands inside unit while discharging.
Don’t Use the unit outside.
Below is a common list of component spares. Should you require any component,
whether listed below or not, please contact Lincat spares for help and availability.
MOTOR 370W 4 POLE FAN 3PH
PROXIMITY SWITCH - UN-THREADED
To Next Page
Loading...
