Below is a detailed description of the programming parameters that may appear in the preview phase:
HEATING
It is the temperature set for the ironing cycle.
Please note that the choice of temperature must be made by referring to the specific characteristics of the fabric.
The definition of temperature is also related to the choice of roller speed.
ROLLER SPEED
It is the speed of rotation of the roller fixed for the ironing cycle.
Please note that the choice of speed must be made by referring to the specific characteristics of the fabric.
The definition of speed is also related to the choice of ironing temperature.
! IMPORTANT!
After the cycle has been started, all the parameters described so far can be changed using the relative display
icons: these changes, however, will not remain in the program's memory.
When the desired program is displayed on display, simply press the START icon to start it, the following images will
appear:
The rotation of the roller and simultaneously heating will be started.
While the machine is running, it is possible to adjust the temperature, speed, and ironing pressure (see relevant
paragraphs).
To Next Page
Loading...
