Imesa FLATWORK IRONER - Installation and Positioning

E170301x.03_EN 29/06/2022
9
Tampering, removal, lack of identification plates or anything else that does not allow the safe identification of the
machine, makes any installation and maintenance operation difficult and automatically voids the warranty.
The washing machines described here are intended exclusively for washing fabrics in water and are intended for the
commercial, professional, industrial sectors.
MODELS AND MAXIMUM LOAD CAPACITY
MODELS AND MAX LOAD CAPACITY
MODEL / TYPE
IRONING TABLE WIDTH
IRONING TABLE WIDTH
(mm)
ROLLER DIAMETER
ROLLER DIAMETER
(mm)
MCA 150
1500
300
MCA 180
1800
MCA 210
2100
The models described above are intended for drying and ironing flat linen in the industrial field.
6. INSTALLATION AND POSITIONING
All installation operations must be carried out by professionally qualified personnel. Place the machine on a flat surface
in a stable and horizontal way, using the adjustable feet placed at the base of the sides. Check the correct bubble
positioning of the machine. Check the correct leveling of the machine as follows:
- Check the leveling first on one side, and then on the other side of the machine
- Then check the leveling in the central part of the machine
-