6. INSTALLATION AND CONNECTIONS
SAFETY INSTRUCTIONS
Before connecting the thermostat, make sure that the UNIT TO BE CONTROLLED
(boiler, pump, air conditioning system, etc.) is NOT CONNECTED from the electrical
source. Make also sure that the power supply is the same as the one specified inside
the thermostat base (250V~ max).
PLA
CEMENT OF THE
THERMOSTAT
Install the thermostat away from heat sources (radiators, sunrays, kitchens) and away from doors / windows, at 1.5 mt from the
floor.
9
NO
YES
LIBR. DUO PLUS INGLESE standard 24-01-2000 14:46 Pagina 10
To Next Page
Loading...
