41
2
INTRODUCING THE
PRODUCT
2.1 IMPORTANT ADVICE.
Inspecting and handling the unit.
Upon delivery, check the packaging and immediately report
any damage to the shipping company.
Consider the following when handling the unit:
•
Fragile, handle with care.
• Choose the route for transporting the unit in advance.
• Move the unit in its original packaging, if possible.
• Use special protective devices when liing the unit so as
not to damage the belts, and pay attention to the position
of the unit’s centre of gravity.
We recommend you strictly follow these instructions.
e product warranty is rendered null and void if the
above instructions are not complied with.
e manufacturer declines any liability for any faults to the
product resulting from transport or handling not complying
with the above recommendations.
2.2 TECHNICAL SPECIFICATIONS.
Maximum operating temperature 1.6 Mpa
Minimum operating temperature 0.15 Mpa
Relative humidity < 90% (0 ~ 80%)
Minimum cooling water inlet temperature 3°C (rated 7°C)
Maximum cooling water outlet temperature 70°C (rated 50°C)
Water pH 6.5 ~ 7.5
Cooling / Heating
Inside temperature 17°C ~ 32°C / 0°C ~ 30°C
Water inlet temperature 3°C ~ 20°C / 30°C ~ 70°C
To Next Page
Loading...
