What to do if the Immergas VICTRIX 26 2 I has insufficient system pressure?
If your Immergas Boiler has insufficient system pressure, check the boiler manometer bar and restore the correct pressure if necessary.
How to fix safety thermostat block in Immergas VICTRIX 26 2 I?
If your Immergas Boiler's safety thermostat is blocked due to overheating or there's a flame control anomaly, press the Reset button (3).
What to do if Immergas VICTRIX 26 2 I Boiler has an ignition block?
If your Immergas Boiler experiences an ignition block, press the Reset button (3).
How to fix flue safety thermostat block in Immergas Boiler?
If the flue safety thermostat on your Immergas Boiler is blocked, it might be due to a partial internal obstruction (caused by lime scale or mud) or external blocking (combustion residues) in the condensation module. To resolve this, press the Reset button (3).
What to do if Immergas Boiler is blocked for maximum time, gas valve opening?
If your Immergas Boiler is blocked for maximum time due to the gas valve remaining open longer than normal without the boiler switching on, press the Reset button (5).
Why low temperature safety thermostat intervention in Immergas VICTRIX 26 2 I Boiler?
If the low temperature safety thermostat in your Immergas Boiler activates, it indicates an anomaly causing excessive overheating of the flow temperature in low temperature conditions. Reset the thermostat after it has cooled down adequately.
To Next Page
General