Immergas VICTRIX PRO V2 EU - Page 119

VICTRIX PRO V2 35 - 55 - 60 - 68 - 80 EU
119
28.1 VICTRIX PRO V2 55 EU COMBUSTION FEATURES
Gas ow rates refer to net caloric value at a temperature of 15°C and at a pressure of 1013 mbar.
Flue gas temperature values refer to an air inlet temperature of 15°C and ow/return temperature of 80/60°C.
Methane (G20) LPG (G31)
Maximum heat input of gas G20 m
3
/h 5.40
Min. heat input of gas G20 m
3
/h 0.57
Maximum heat input of gas G31 kg/h 3.96
Min. heat input of gas G31 kg/h 0.42
Supply pressure mbar 20 37
Flue ow rate at maximum nominal heat output kg/h 82 84
Flue ow rate at maximum nominal heat output
gas 20% H2NG
kg/h 88
Flue ow rate at min heat output kg/h 9 9
Flue ow rate at min heat output
gas 20% H2NG
kg/h 9
Chimney losses with burner on (100% Pn) (80/60°C) % (W) 2,3 (1173)
Chimney losses with burner o % (W) 0,02 (10)
Casing losses with burner on (100% Pn) (80/60°C) % (W) 0,1 (51)
Casing losses with burner o % (W) 0,23 (115)
Flue gas temperature Maximum Heat Input °C 74 74
Flue gas temperature Min. Heat Input °C 60 61
CO
2
at Maximum Heat Input % 9.2 10.3
CO
2
at Maximum Heat Input
gas 20% H2NG
% 8.0
CO
2
at Min. Heat Input % 8.7 9.6
CO
2
at Min. Heat Input
gas 20% H2NG
% 7,9
CO at Maximum Heat Input ppm 220 250
CO at Maximum Heat Input
gas 20% H2NG
ppm 80
CO at Min. Heat Input ppm 3 3
CO at Min. Heat Input
gas 20% H2NG
ppm 3
Weighted CO mg/kWh 24 25
NO
x
at the Maximum Heat Input mg/kWh 58 63
NO
x
at Min. Heat Input mg/kWh 27 31
Weighted NO
x
mg/kWh 39 30
NO
x
class - 6 6