Need help?Do you have a question about the Immergas VICTRIX 20 Plus and is the answer not in the manual?
General| Output Power | 20 kW |
|---|---|
| Control Type | Electronic |
| NOx Class | 5 |
| Hot Water Production Type | Instantaneous |
| Fuel Type | Natural Gas or LPG |
| Dimensions (H x W x D) | 748 x 440 x 256 mm |
| Dimensions (HxWxD mm) | 700 x 400 x 280 |
| Type | Wall-mounted condensing boiler |
Shows the layout and labels for the boiler's control interface and indicators.
Illustrates the control panel for the storage tank, including its thermometer.
Explains heat transfer, diverter valve function, and water flow in the primary circuit.
Shows flow-head characteristics for different by-pass adjustments.
Covers by-pass, 3-bar safety valve, and expansion vessel for pressure management.
Includes no-water switch, one-way valves, and air vent for safe operation.
Explains how the secondary circuit operates for domestic hot water production.
Describes the construction and coils of the storage tank.
Covers anode for protection and optional polyphosphates unit for limescale.
Details the safety valve unit, including pressure relief and flow limiter.
Shows head vs flow rate for various storage tanks with Victrix 20 Plus.
Shows head vs flow rate for various storage tanks with Victrix 27 Plus.
Explains the working principle and motor operation of the 3-way diverter valve.
Covers adjustments for nominal/minimum heat output and air-gas ratio.
Details fume circuit operation, diverter, and condensation runoff.
Details the main power supply and components in the 230V AC circuit.
Lists safety devices like detection electrode and line fuse with their functions.
Describes the function of transformer fuse, main switch, and safety thermostats.
Details components like ignition unit, circulator, electrodes, and control board.
Lists devices like zone control, remote control, sensors, and thermostats for safety and control.
Explains indicators (LEDs, display) and fan operation status.
Describes boiler operation when controlled by a room thermostat.
Explains boiler operation when controlled by the Amico Remote Control.
Explains boiler operation for domestic hot water production.
Details how the control board manages heating and D.H.W. requests.
Covers relays controlling circulator, diverter valve, and fan operation.
Details settings for heating and D.H.W. temperatures and pump selector switch.
Lists input signals from safety devices and control units like sensors and switches.
Covers input signals for fan speed and flame detection.
Signals for zone control, Amico Remote Control display, and boiler status.
Details fan control signals and adjustment potentiometers for temperature.
Covers circulator antilock, failed ignition, and overtemperature protection.
Details post-circulation, sealed-chamber ventilation, and sensor breakage checks.
Explains the meaning of DL1, DL2, and DL3 LEDs for boiler status.
Details temperature readings, set values, and error codes shown on the display.
Step-by-step process for boiler operation in heating mode.
Step-by-step process for boiler operation in domestic hot water mode.
Details heat output, efficiency, and pressure ratings for Victrix 20 Plus.
Covers gas nozzle, supply pressure, circuit pressure, and temperature limits.
Details heat output, efficiency, and pressure ratings for Victrix 27 Plus.
Covers gas nozzle, supply pressure, circuit pressure, and temperature limits.
Table of heat output, gas flow rate, and pressure for Methane.
Table of heat output, gas flow rate, and pressure for Butane.
Table of heat output, gas flow rate, and pressure for Propane.
Table of heat output, gas flow rate, and pressure for Methane.
Table of heat output, gas flow rate, and pressure for Butane.
Table of heat output, gas flow rate, and pressure for Propane.
To Next Page