Need help?Do you have a question about the IMO WD-L and is the answer not in the manual?
Overview of slew drives, their purpose, and basic components.
Introduces WD and SP series slew drives and their design principles.
Details the features and components of the lighter WD-L series slew drives.
Details the features and components of the heavier WD-H series slew drives.
Describes the SP series slew drives powered by a pinion gear unit.
Specifies the intended applications and highlights non-intended uses and warnings.
Explains warning symbols, signal words, and tips used in the manual.
Outlines manufacturer liability, copyright, and usage restrictions for the manual's content.
Emphasizes the importance of using only original IMO spare parts for safety and performance.
Provides information on how to contact customer service for technical assistance.
Covers general safety, emergency-stop integration, and system utilization requirements.
Details specific hazards related to electrical current, hydraulic systems, and VCI foil.
Defines customer responsibilities for safety, regulations, and personnel training.
Outlines requirements for unauthorized, specialized, and qualified personnel.
Lists essential PPE for safe operation, including work clothing, safety footwear, and gloves.
Provides safety instructions and procedures for transporting slew drives by crane or forklift.
Guides on checking deliveries for completeness and transport damage, including complaint procedures.
Describes packaging methods, materials used, and explains common packaging symbols.
Details optimal storage conditions for packages to maintain product integrity and prevent corrosion.
Covers safety precautions and personnel requirements for installation and commissioning.
Outlines essential preparation steps including lubricating and cleaning the slew drive and structure.
Explains how to measure flatness, perpendicularity deviations, and deformation of the mounting structure.
Guides on selecting correct, quality mounting elements and bolt specifications.
Details procedures and specifications for tightening bolts using torque wrenches and hydraulic tensioners.
Covers the steps for installing the slew drive, including hardness gap, positioning, and bolting.
Explains how to measure tilting clearance and circumferential backlash.
Outlines the steps for performing a function test on the installed slew drive.
Covers safety precautions and personnel requirements for performing maintenance tasks.
Details the correct procedures for cleaning and lubricating the slew drive.
Outlines recommended maintenance tasks and their frequency for optimal operation.
Details tasks like inspecting bolts, checking clearance, backlash, seals, and post-maintenance measures.
Covers safety precautions and personnel requirements for dismantling the slew drive.
Outlines steps for safely dismantling the slew drive and its environmentally responsible disposal.
To Next Page
General
