Slew Drives
Transport, packaging, and storage
20
4.6 Storage
Storage of packages
Fig. 9: Ensure protective storage
Fig. 10: Do not store vertically
Only store packages under the following conditions:
Do not store outdoors.
Store in a dry and dust-free location.
Do not expose to aggressive media.
If stacking, use stable intermediate layers.
Protect from direct sunlight.
Avoid mechanical vibration.
Storage temperature: >5° C (>41° F) to 40° C (104° F).
Relative humidity: < 65 %.
Do not store vertically.
For longer periods of storage (> 2 months) regularly check the
general status of the packages. Touch up or re-apply anti-
corrosion agents as needed.
The anti-corrosion protection period is 12 months, if the
aforementioned storage requirements are observed. We recommend
to re-apply the preservation after 12 months.
Please refer to tab. 1 below for anti-corrosion agents.
Recommended anti-corrosion agents
Manufacturer Product name
Period of
anti-
corrosion
protection
Cortec VpCI
TM
-329 ≥ 12 months
Fuchs Europe
Schmierstoffe GmbH
Anticorit OHK-F ≥ 12 months
Schramm Molecular Nato-Fluid-C634
≥ 12 months
Pos: 5.35 /KN200 6-SM/nL---------- A bschnittsend e ---------- @ 8\m od_1141997892 953_0.doc @ 7547 1
Tab. 1
Long-term preservation is possible for storages which are planned for
several years and can already be discussed during the technical
consultation. Re-application of anti-corrosion agents as well as initial
greasing can be performed by our customer service ( page 2) prior
to operation.
Greased slew drives shall not be stored for a longer period than 3
years. Greases can change their chemical-physical behaviour
during storage. Grease provisions can be diminished by a storage
period of more than 3 years. The storage of slew drives shall not
exceed 1 year if food lubricants are used.
Under certain circumstances storage instructions are affixed to the
packages that go beyond the requirements cited here. Comply
with these instructions accordingly.
To Next Page
Loading...
