IMO WD-L - Page 4

Slew Drives
Table of contents
4
5.3.3 Bolting the slew drive ................................31
5.3.4 Determining the tilting clearance ................33
5.3.5 Determining the circumferential backlash ....34
5.4 Function test ...........................................................35
6 Maintenance ...............................................................36
6.1 Safety .....................................................................36
6.2 Cleaning..................................................................37
6.3 Maintenance schedule ..............................................37
6.4 Maintenance tasks ...................................................39
6.4.1 Inspecting the mounting bolts ....................39
6.4.2 Checking the tilting clearance .....................39
6.4.3 Checking the circumferential backlash.........40
6.4.4 Lubricating the slew drive ..........................41
6.4.5 Inspecting the seals...................................42
6.5 Measures after successful maintenance.....................42
7 Dismantling.................................................................43
7.1 Safety .....................................................................43
7.2 Dismantling .............................................................44
7.3 Disposal ..................................................................44
8 Technical data – Type plate ........................................45