Imperial DABMAN d20 - 2.4. Connecting the Device

67
66
IMPERIAL DABMAN d20
E
> The power unit must never be touched or grabbed
with wet or moist hands.
2.4. Connecting the device
> Only plug the device into properly installed,
earthed and electrically secured power sockets.
> Please keep the power source (socket)
easily accessible.
> Do not bend or squeeze any cables.
> Before using the device, check whether the
voltage specification on the device corresponds to
local power grid’s voltage.
The specifications on the power unit must corre
spond to the local power grid.
> Only connect the radio’s power unit to a
properly installed grid socket with
alternating current, 220-240 V,
50–60 Hz.
> Place the radio on a solid, even surface.
> The device consumes power in standby mode.
To fully switch off the device, the power
plug must be pulled from the socket.
2. SAFETY INFORMATION