impinj RShell - Config System Command; Config System Time Command

RShell Reference Manual
Revision 4.2, Copyright © 2009, Impinj, Inc. Proprietary and Confidential 23
Table 4-23 Config SNMP EPCG Device Command Parameters
Command Argument Format Description
role <role> string The string that should be reported for device role
Example to configure the epcg device role to “my-reader-role”:
> config snmp epcg device role my-reader-role
Status='0,Success'
4.2.7 Config System Command
The
config system command allows configuration of the system identification parameters. The
parameters are shown in Table 4-24.
Table 4-24 Config System Command Parameters
Command Description
time Configure the system time.
4.2.8 Config System Time Command
This menu allows configuration of the system identification parameters. See Table 4-25 for a
description of the command parameters.
Table 4-25 Config System Command Parameters
Command Format Description
Time MMDDhhmmCCYY
MM.DD-hh:mm:ss
CCYY.MM.DD-hh:mm:ss
CCYY.MM.DD-hh:mm
hh:mm:ss
hh:mm
Configure the system time. Time must be entered in
one of the given formats.