impinj RShell - Show Command; Show Image Command

RShell Reference Manual
Revision 4.2, Copyright © 2009, Impinj, Inc. Proprietary and Confidential 25
4.3 Show Command
The show command has several submenus, as shown in Table 4-26, and described in the
following sections.
Table 4-26 Show Command Parameters
Command Description
image Sub-menu of image status commands.
logging Sub-menu of logging status commands.
network Sub-menu of network status commands.
rfid Sub-menu of RFID status commands.
snmp Sub-menu of SNMP status commands.
system Sub-menu of system status commands.
4.3.1 Show Image Command
The
show image command has parameters as shown in Table 4-27.
Table 4-27 Show Image Command Parameters
Command Description
metafile Displays information about the current upgrade metafile.
If no metafile has ever been successfully downloaded,
only a subset of the available fields are shown.
summary Displays the reader’s image information, see Table 4-29
and Table 4-30.
Following an upgrade command, UpgradeStatus can take any of the values shown in Table 4-28.
For each abnormal status, a reason parameter is given to indicate the reason for the status. The
reason values are also given in Table 4-28