impinj RShell - Show RFID Command

RShell Reference Manual
38. Proprietary and Confidential Revision 4.2, Copyright © 2009, Impinj, Inc.
Table 4-45 Show Network TCP Response Parameters
Argument Format Description
tcpRtoAlgorithm integer
tcpRtoMin integer
tcpRtoMax integer
tcpMaxConn integer
tcpActiveOpens integer
tcpPassiveOpens integer
tcpAttemptFails integer
tcpEstabResets integer
tcpCurrEstab integer
tcpInSegs integer
tcpOutSegs integer
tcpRetransSegs integer
tcpInErrs integer
tcpOutRsts integer
See MIB-2 RFC 1213
Table 4-46 Show Network UDP Response Parameters
Argument Format Description
udpInDatagrams integer
udpNoPorts integer
udpInErrors integer
udpOutDatagrams integer
See MIB-2 RFC 1213
4.3.4 Show RFID Command
The
show rfid menu contains commands to display RFID parameters and statistics. Submenu
commands are shown in Table 4-47.
Table 4-47 Show RFID Command Parameters
Command Description
Stat Display RFID statistics for reader.
Llrp Leads to submenu of LLRP status statistics