RShell Reference Manual
42. Proprietary and Confidential Revision 4.2, Copyright © 2009, Impinj, Inc.
Table 4-49 Show RFID LLRP Command Parameters
Command Argument Format Description
accessspec id integer Display the XML text of a specified AccessSpec.
capabilities Display the XML text of the LLRP capabilities advertised
by this reader.
config Display the XML text of the LLRP configuration.
inbound Display information about LLRP client-initiated
connections.
outbound Display information about LLRP reader-initiated
connections.
region Display the LLRP region and Impinj sub-region at which
the reader is currently operating. Also will display sub-
regulatory region information when configured by LLRP
extensions
rospec id integer Display the XML text of a specified ROSpec.
stat Report LLRP statistics
summary Display a summary of the LLRP configuration and status.
4.3.5 Show SNMP Command
The
show snmp menu displays information about the SNMP configuration. Table 4-50 provides a
list of the available show snmp subcommands. The response parameters for
show snmp
summary
are shown in Table 4-51, and for show snmp epcg are shown in Table 4-52. The
response parameters for
show snmp all is a concatenation of the summary and epcg response
parameters.
Table 4-50 Show SNMP Command Parameters
Command Description
all Displays all of the the SNNP settings
summary Displays summary of generic SNMP settings.
epcg Displays EPCG RM MIB specific settings
To Next Page
Loading...