impinj RShell - Page 27

RShell Reference Manual
26. Proprietary and Confidential Revision 4.2, Copyright © 2009, Impinj, Inc.
Table 4-28 Show Image Metafile Response Parameters
Argument Format Description
MetafileUri string The current upgrade metafile URI
RetrieveMode (Manual |
Auto)
The current retrieve mode
RetrievePeriod integer The current retrieve period, present only if retrieve
mode is auto. This period is specified in seconds.
UpgradeMode (auto | forced) The upgrade mode in use if the metafile is
currently available
CommitMode (immediate |
scheduled |
wait-4-cmd)
The commit mode if metafile is currently available
CommitTime string The scheduled commit time, present only if
commit mode is set to scheduled. Its format is
<timezone-yyyy-mm-dd-hh-mm-ss>, current only
gmt is supported.
EarlyActOk (yes | no) Indicates whether an early activation of the
upgrade image is allowed if the commit mode is
scheduled. Present only if the metafile has the
early-act-ok field.
DownloadRetries integer Number of times to retry a failed download.
DownloadRetryPeriod integer Number of seconds between retry attempts.
ReaderModelName string The model name of the reader. This indicates
which model section of the metafile was used to
load settings.
ImageType integer Firmware image upgrade file type (presently ‘10’).
DownloadMode (immediate |
fixed-delay <delay> |
random-delay <delay>)
Indicates the current download mode. For fixed or
random delay the DownloadDelay field indicates
the corresponding the delay value.
DownloadDelay integer For fixed-delay this is a constaint offset. For
random-delay this is the maximum value for a
randomly chosen offset.
ImageFileUri uri URI from which the file image is retrieved.