EasyManua.ls Logo

impinj RShell - Page 41

Default Icon
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RShell Reference Manual
40. Proprietary and Confidential Revision 4.2, Copyright © 2009, Impinj, Inc.
Table 4-48 Show RFID Stat Response Parameters
Argument Format Description
LastStatisticReset Integer The elapsed time [in seconds] since the RFID statistics
were lat reset.
ReaderOperationalStatus enabled |
disabled
Indicates whether RFID applications are running on
the reader
ReaderAdministrativeStatus enabled Desired status by adminstration—always enabled
Antenna<n>AdministrativeStatus enabled Desired status of antenna by administration—always
enabled; <n> is 1–4
Antenna<n>OperationalStatus enabled |
disabled |
unknown
Indicates if an antenna is physically connected to the
reader and operating properly. If no RFID operation
has been performed, and no in-band LLRP checks of
antenna status have been performed, the reader will
report unknown for this statistic. Once an RFID
operation has occurred, or an in-band check is
performed, the reader will update this value.
Enabled=connected antenna
Disabled=disconnected from antenna.
Note that accurate reports are only available on in-use
antennas. Antennas currently not in use are not
checked.
Antenna<n>LastPowerLevel Integer 100 times the dBm setting of Antenna <n>; <n> is 1–4
Antenna<n>LastNoiseLevel Integer Always 0
Antenna<n>EnergizedTime Integer Time Antenna <n> has been powered, in milliseconds;
<n> is 1–4
Antenna<n>UniqueInventoryCount Integer Number of unique tags seen at Antenna <n>; <n> is 1–
4
Antenna<n>TotalInventoryCount Integer Total Inventory Count for Antenna <n>; <n> is 1–4
Antenna<n>FailedInventoryCount Integer Always 0
Antenna<n>ReadCount Integer Number of tags read at Antenna <n> that matched the
configured filters; <n> is 1–4
Antenna<n>FailedReadCount Integer Number of tags where a read was attempted at
Antenna <n> because the tag matched the configured
filters, but the read failed; <n> is 1–4
Antenna<n>WriteCount Integer Number of tags written at Antenna <n> that matched
the configured filters; <n> is 1–4
Antenna<n>FailedWriteCount Integer Number of tags where a write was attempted at
Antenna <n> because the tag matched the configured