RShell Reference Manual
Revision 4.2, Copyright © 2009, Impinj, Inc. Proprietary and Confidential 45
Table 4-55 Show System Platform Response Parameters
Argument Format Description
BootEnvVersion integer Internal ‘Boot Environment’ data version
HardwareVersion
IntHardwareVersion
string Returns the hardware version information for the reader
and internal hardware.
SerialNumber
IntSerialNumber
string Returns the reader’s hardware serial number for thr reader
and internal hardware.
MACAddress string MAC address of the unit’s Ethernet port
RegionsValid integer[,integer,…] Indicates the numerical values of the regions allowed on
this hardware.
FeaturesValid integer[,integer,…] Indicates features enabled on this hardware
BIOSVersion string Returns the version information for the reader BIOS
PTN integer.integer Product Type Number. This is used to diferentiate reader
models.
UptimeSeconds integer Time since last reboot in seconds
BootStatus integer Bootloader status. This indicates various conditions
detected by the boot loader.
BootReason (Cold |
Processor / Reboot |
External Watchdog |
External Watchdog
Fallback )
The reason for the last reboot. A Cold reset occurs when
power is first applied to the reader. A Processor / Reboot
occurs when software initiates a reboot. External
Watchdogs are the result of the reader being reset by the
embedded watchdog feature. An External Watchdog
Fallback is reported after repeated watchdog resets and an
automatic rollback of the image (if available).
PowerFailTime integer Linux time of last power fail expressed in seconds. Only
defined for the first boot following a power failure.
ActivePowerSource ( poe | jack ) Indicates power source as either Power over Ethernet
(PoE) or power jack.
To Next Page
Loading...