IMT 5005i User Manual

Oshkosh Corporation Classification: Unrestricted
40 IMT Electric Cranes Operation & Safety Manual # 99904381
Gearbox bearings
Lithium or GP bearing
lube
Grease gun
Every 50 hours
Grease Zerks
Crane grease zerks must be greased on a weekly basis during normal operating conditions.
Under severe operating conditions the zerks must be greased more frequently. Each grease
zerk is marked with a decal, “Grease Weekly”, as shown.
Crane worm gear teeth and bearing teeth must be lubricated weekly with Molub-Alloy 882 Heavy
or equivalent. See chart for the lubrication product schedule. Apply products with a grease gun
or brush as directed.
Crane Hydraulic Oil Specifications
Hydraulic Oil Specifications
The hydraulic oil for your electric crane must be ISO VG32, low pour, anti-wear hydraulic oil.
IMT recommends SAE oil based on the following temperature ranges:
SAE DESIGNATION
TEMPERATURE RANGE
5W-20
-10 to 180° F (-23 to 82° C)
10W
+10 to 180° F (-12 to 82° C)
10W-30
+10 to 210° F (-12 to 99° C)
Mobil DTE meets these specifications and is the
hydraulic oil used when the crane is manufactured.

IMT 5005i Specifications

General

Brand	IMT
Model	5005i
Category	Construction Equipment
Language	English