IMT 10000 User Manual

Manual Part # 99905185
Model 10000 30-foot Parts &
Specifications
Effective S/N 100001101001
Revised 20141001
IOWA MOLD TOOLING CO., INC.
PO Box 189
Garner, IA 50438
Tel: 641-923-3711 FAX: 641-923-2424
Website: http://www.imt.com
Copyright © 2014 Iowa Mold Tooling Co., Inc.
All rights reserved
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording or otherwise without the
prior written permission of Iowa Mold Tooling Co., Inc.
Iowa Mold Tooling Co., Inc. is an Oshkosh Corporation Company.

IMT 10000 Specifications

General

Brand	IMT
Model	10000
Category	Construction Equipment
Language	English

Summary

Revisions

Introduction

Specifications

Model 10000 30' Specifications

Detailed specifications for the Model 10000 30-foot crane.

10000 30' Minimum Chassis Specifications

Minimum chassis requirements for mounting the 10000 30' crane.

Dimensional Drawing

Visual representation of the crane's dimensions.

30' 10000 Crane Capacity

Chart detailing the crane's lifting capacity at various angles.

Crane Reference

Greasing Instructions

Procedures and recommendations for lubricating crane components.

10000 30-foot Crane Recommended Spare Parts

List of recommended spare parts for the 10000 30-foot crane.

Installation Introduction

Overview of the crane installation process.

Telescopic Crane Orientation

Information on the proper orientation of the telescopic crane.

Crane Controls

Details on how to operate the crane's control systems.

Additional Installation Components, Non-IMT Body

Chassis Wiring Harness (77441476 / 99905212)

Diagram and information for the chassis wiring harness.

Parts

Parts Information

General information and identification for crane parts.

Base & Mast Assembly, Test Stand (99904925)

Parts list and diagram for the base and mast assembly on a test stand.

Base & Mast Assembly, Truck Mount (99904925)

Parts list and diagram for the base and mast assembly on a truck.

Boom Assembly (99904925)

Parts list and diagram for the boom assembly.

Valvebank Assembly (99904925)

Parts list and diagram for the valvebank assembly.

Winch & Anti-Two Block Assembly (99904925)

Parts list and diagram for the winch and anti-two block assembly.

Crane & Winch Assembly (99904925)

Parts list and diagram for the crane and winch assembly.

Flip Sheave Assembly (99904925)

Parts list and diagram for the flip sheave assembly.

Gear Rotator (71056577)

Parts list and diagram for the gear rotator component.

Lower Cylinder (51722956)

Parts list and diagram for the lower cylinder.

Extension Cylinder Assembly (51723604)

Parts list and diagram for the extension cylinder assembly.

Winch Specifications (71570825)

Technical specifications for the 71570825 winch.

Winch Parts (71570825)

Parts list and diagram for the 71570825 winch.

Winch Oil Specifications

Recommended lubricants and oil change frequency for the winch.

Valvebank-Single Proportional (73734472)

Parts list and diagram for the single proportional valvebank.

Valvebank (73734727)

Parts list and diagram for the 73734727 valvebank.

Hydraulic Schematic Fully Proportional (99905018)

Schematic diagram of the fully proportional hydraulic system.

Hydraulic Schematic Single Proportional (99905596)

Schematic diagram of the single proportional hydraulic system.

Radio Remote Harness (77441481)

Wiring diagram for the radio remote harness.

Decal Placement, 10000 30' Crane

Guide for the placement of decals on the crane.

Option-Winch Roller (99905055)

Information and parts for the winch roller option.

Option - Boom Tip Light Kit (99905289)

Information and parts for the boom tip light kit option.

General Reference

Inspection Checklist

Form and guidelines for performing regular crane inspections.

Deficiency / Recommendation / Corrective Action Report

Report form for documenting issues and corrective actions.

Thread Torque Charts

Tables of torque values for various bolts and thread types.