Revisions
DATE LOCATION DESCRIPTION
ECN 11624 - Harness change
ECN 11774 - Added cable guide
ECN 11783 - 73734727 was 73734635
ECN 11913 - Single proportional system available
ECN 11945 - Cable guide changed
ECN 11952 - A2B bracket changed
ECN 11959 - Horn controls added
ECN 11940 - Hook stow and pin changes
ECN 11895 - S3 crane hook, snatch block, and mast changes
ECN 11860 - Winch studs changed
Engineering mark-up; valvebank assembly item 62 part number change.
77441537
99905614
Added nailboard and circuit charts
Added circuit chart
Added horn circuit schematic
Updated part number of item 13
Updated details of item 54
99904925
99905289
ECN 12147 – move limit switch, update crane assembly within drawings
Corrected/Added part numbers per 9/11 drawing from vendor.
ECN 12216 – changed width of pin boss from 4.88” to 4.75”
ECN 12264 – Molub-Alloy 882 was Molub-Alloy 936
ECN 12253 – Delete 72534560, Add 72532699 & 72532674
To Next Page
Loading...
Need help?
General
