24 Model 10000 30-foot Parts & Specifications Manual Part # 99905185
Parts Information
GENERAL
This section contains the exploded parts drawings and accompanying parts lists for the
assemblies used on this crane. These drawings are intended to be used in conjunction with the
instructions found in the maintenance and repair manuals for this crane family. For optional
equipment such as winches and remote controls, refer to the appropriate service manual.
WARNING
Do not attempt to repair any component
without reading the information contained in
the repair section. Pay particular attention to
statements marked Warning, Caution or
Note in that section. Failure to comply with
these instructions may result in damage to
the equipment, personal injury or death.
CRANE IDENTIFICATION
Every IMT crane has an identification placard (see figure). This placard is attached to the inner
boom, mast, or crane base. When ordering parts, communicating warranty information, or
referring to the unit in correspondence, always include the serial number and model numbers.
Address all inquiries to your authorized IMT distributor or to:
Iowa Mold Tooling Co., Inc.
Box 189, Garner, IA 50438-0189
Telephone: 641-923-3711
Technical Support Fax: 641-923-2424
MODEL
NUMBER
SERIAL
NUMBER
MFG
DATE
IOWA MOLD TOOLING CO., INC.
BOX 189, GARNER, IA 50438-0189
To Next Page
Loading...
Need help?
General
