This volume includes specifications, installation information, and spare parts drawings applicable
to your particular crane. For operating, maintenance and repair instructions, see the Telescopic
Crane Operation, Maintenance and Repair Manual (IMT part number 99905190).
It is your responsibility to operate and maintain this unit in a manner that will result in the safest
working conditions possible. You must be aware of existing Federal, State and Local codes and
regulations governing the safe use and maintenance of this IMT crane. The crane was designed
and built to meet the standards of ANSI/ASME B30.5, Mobile & Locomotive Cranes. Contact the
American Society of Mechanical Engineers (www.asme.org) for more information on
ANSI/ASME B30.5.
Misuse of the crane through overloading, abuse, lack of maintenance and unauthorized
modifications will void the warranty on any part of the unit subjected to this misuse. No warranty
- verbal, written or implied - other than the official, published IMT new machinery and equipment
warranty will be valid with this unit.
Throughout the manual, NOTEs, CAUTIONs and WARNINGs are used to draw the attention of
personnel. They are defined as follows:
For a safe work environment, treat this equipment with respect and service it regularly.
Introduction
CAUTION
A CAUTION is used when there is the
very strong possibility of damage to the
equipment or premature equipment
failure.
WARNING
A WARNING is used when there is the
potential for personal injury or death.
NOTE
A NOTE is used to either convey
additional information or to provide
further emphasis for a previous point.
To Next Page
Loading...
Need help?
General
