•
INSTALLATION
Use the included wrench to remove the cover from the TPMS sensor. Install the battery with
the positive terminal facing upward then reinstall cover. Attach anti-theft attachment to
bottom of sensor.
Screw Locking nut onto tire valve. *
*This product is recommended with a metal valve, or to replace the original
valve regularly to ensure better quality.
Tire valve
6
•
INSTALLATION
Use the included wrench to remove the cover from the TPMS sensor. Install the battery with
the positive terminal facing upward then reinstall cover. Attach anti-theft attachment to
bottom of sensor.
Screw Locking nut onto tire valve. *
*This product is recommended with a metal valve, or to replace the original
valve regularly to ensure better quality.
To Next Page
Loading...