Inateck BCST-60 - Regulatory and Compliance Information; FCC Compliance Statement

12
EN
Product Specication
Packing list
• Inateck BCST-60*1
• USB Cable*1
• Instruction Manual*1
• 2.4GHz Wireless Adapter*1
FAQs
1. Will settings be kept when Inateck BCST-60 is power o󱐯?
Answer: All settings are made by scanning relevant barcodes, and stored in
scanner memory. They are kept even if scanner powers o󱐯. They are available to
users if scanner powers on.
2. Garbled or error appears in output result?
Answer: The default keyboard language of Inateck BCST-60 is English. Please refer
to the instruction manual about keyboard language, and set correct one.
3. Is there any barcodes to remove Enter for su󱐰x?
Answer: Refer to the “Frequently Used Barcodes” in instruction manual, and use “Do
Not Apply Enter for Su󱐰x”.
4. The data cannot be sent to my computer. Why?
a. When the distance between Inateck BCST-60 and its adapter exceeds the
e󱐯ective range, scanned data will not upload to comupter immediately. Instead,
it will be kept in the buffer of Inateck BCST-60. Quickly double press on the
trigger can upload data from bu󱐯er.
Model Number Inateck BCST-60
Indication Buzzer, LED
Battery Capacity 2600mAh
EEPROM 256K
Light Source Laser LED 650 ± 10nm
Applicable Barcodes Codabar, Code 11, Code 128, Code39, Code 93, EAN-8, EAN-13, ISBN, ISSN, MSI,UPC-A,
UPC-E, IATA 25, Industrial 25 / Standard 25, Interleaved 25,Matrix 25, China Postal Code，
FedEx，USPS, Code 32, VIN
Resolution 3mil
Decode Rate 220 times/s
Decode Mode Single-Line Aiming
Print Contrast 20%
Decode Angles Roll 30º，Pitch 75º，Yaw 80º
Wireless Operating
Frequency
2400.0~2483.5MHz
Wireless transmission Power -4.36dBm