24 25
9. Maintain proper posture to take the test.
*
For proper test posture, refer to "C.Test Posture".
*
When the hand and foot electrode is recognized, the InBody Test begins automatically.
10. InBody Test begins.
*
It will take 90 seconds to complete the test.
11. The result screen is displayed after completing the test.
If a printer is connected to InBody970, you can check the result according to the selected type of Result Sheet.
*
Please refer to the Setup in Administrator Menu for details of printer and Result Sheet setting.
12. Press [Exit] to end the measurement.
To Next Page
Loading...
