Incon 1250-LTC - 2.4 Operating Modes

34
2.4 Operating Modes:
The model 1250-LTC has six operating modes. Each mode causes the 1250-LTC to
function differently. Determine which of the following operating modes is best suited to your
application. The proper mode will depend upon the desired numbering of the taps and where
the neutral taps are located:
16 = Base 1 Uni-polar Segmented Linear Analog (Neutrals can be at any tap number)
17 = Base 1 Uni-polar Segmented Stepped Analog (Neutrals can be at any tap number)
18 = Base 0 Uni-polar Segmented Linear Analog (Neutrals always at “0”)
19 = Base 0 Uni-polar Segmented Stepped Analog (Neutrals always at “0”)
20 = Bi-polar Segmented Linear Analog (Neutrals always at “0”)
21 = Bi-polar Segmented Stepped Analog (Neutrals always at “0”)