IndeeLift PPU-S - Maintenance

To Next Page

To Previous Page

PPU-S User’s Manual

Depending on the circumstances, you may choose to use the waist belt only. The

anchor points and belt assemblies also allow for additional configurations, (such as crossing the chest

of the person being lifted by attaching one belt assembly to the upper left and lower right anchor points

and the second belt assembly to the upper right and lower left anchor points).

Once the fallen individual is securely buckled to the lift using the belt assemblies,

pull on each buckles’ strap to ensure both belts are snug and secure before pressing the up button on

the wired remote. As the seated person is being lifted, have them gradually move their legs inward, then

ensure their feet are properly positioned before they stand up from the PPU-S’s seat, (as the would from

any chair).

When lifting a person with little-to-no lower body strength, (such as a paraplegic),

the belts will hold the person securely in place and their legs will naturally move inward towards the

PPU-S as they’re being lifted. A person properly secured to the PPU-S using the two belt assemblies

cannot fall off the PPU-S’s seat!

Maintenance:

The IndeeLift PPU-S requires no regular maintenance. All exposed surfaces can be cleaned with standard

cleaning products. Keeping the battery charged helps improve battery life.

While the PPU-S is extremely durable and will perform well indoors or outdoors,

it is recommended that the PPU-S be stored indoors when not in use.

NOTICE