IndeeLift PPU-S - Battery and Components Overview; Rechargeable Battery Details; PPU-S Component Identification Diagram

To Next Page

To Previous Page

PPU-S User’s Manual

removable to allow for mount assistance or a direct transfer to a wheelchair or other destination.

Rechargeable Battery

The PPU-S comes standard with a rechargeable Lithium-Ion battery pack and charging unit. Charging is

accomplished by plugging the charging unit’s AC power cord into a standard AC wall power outlet, (see

Preparing the PPU-S for use on Page 8). A full charge takes about eight hours. The control system will provide

a beep tone when operated and batteries are in need of being charged.

California requires the following notice: WARNING: Lithium-ion batteries and

products that contain lithium-ion batteries can expose you to chemicals including cobalt lithium nickel

oxide, and nickel, which are known to the State of California to cause cancer and birth defects or other

reproductive harm.

Lithium-Ion batteries offer light weight, high energy density, low memory effect

and long-life. The charger automatically shuts off when charging is complete, which prevents over-

charging. The battery should be charged in a clean, dry location, away from direct sunlight, sparks or

flame. Failure to recharge the battery at least once every three months may result in the battery no longer

accepting a charge. The battery should be fully charged before storing the PPU-S for extended periods.

If the battery needs replacing, dispose of the old battery at a recycling center that accepts rechargeable

batteries.

PPU-S Component Identification:

WARNING

NOTICE