PPU-S User’s Manual
Page 4 of 20 Copyright 2023 IndeeLift, Inc. All Rights Reserved 08/2023
This product contains moving parts where hands or feet could be
injured if they are in an inappropriate location. Users and caregivers must be aware of
everyone’s body parts that could be trapped between the seat platform and the floor or
between the seat platform and any obstruction located above the seat platform level, that
when contacted, could cause Minor or Serious Injury.
PPU-S Features/Functionality:
Seated Lift
The IndeeLift PPU-S is primarily designed to raise a seated person from the floor, or any level above the floor,
to a height that allows the user to stand directly up or to be transferred as required.
For users with less mobility, the transfer directly to a wheelchair or power chair is accomplished by raising the
seat height to about 21” (53 cm), which allows a height difference of 1-2 inches (2.5-5cm) for lift-free transfers
from most seated positions or whatever height that will allow a gravity-assisted transfer.
Once up from the floor, the fallen person can stop at chair height to take a breath and/or rest comfortably or
simply get up and walk away or be directly transferred to a wheelchair, bed, toilet or recliner, all without the risk
of injuries related to the fall recovery. The user can also be lifted to a full standing height allowing them to walk
away without manually standing from a chair height.
Use as a Standing Lift
A secondary function of the PPU-S is to provide lift assistance to a standing person needing a little lift to access
a bed or some tall cabinets or the shelf in the closet at home or the office.
The PPU-S provides users with a method to be lifted while standing to a safe level 12-14 inches from the floor.
This application can assist the user onto a bed that may be the perfect height to get up from but too tall for the
user get up onto. This function can also assist where single or dual step level changes may need to be overcome
in the home or office.
Small Footprint and Easy Portability
The PPU-S is a portable lift that is rolled around on wheels like a traditional dolly. The small footprint allows it to
be positioned in many places other lifts simply cannot go. With a turning radius of 34” (86 cm), the PPU-S can
go just about anywhere including most small bathrooms and hallways.
Optional Mounting Ramp Seat-Tilt
The PPU-S patented design includes a mounting ramp seat that eliminates the need to ever "lift" a person
manually and a tracking function that allows the seat to shift forward as the user is lifted and shifting their weight
onto their legs. A user on the floor either scoots onto the lift using the front ramp or they can tilt up onto the seat.
The PPU-S seat plate can either be locked in a stationary position or unlocked to allow the seat plate to rotate
forward to allow a user to get to a standing position. Two locking tabs are located at the rear of the seat plate,
one on each side of the main vertical column.
Wired Remote
The wired remote has a 5’ (1.5m) retractable cord, allowing the user or a helper to operate the lift. The wired
remote has physical, easy-operate button controls that indicate the up and down functionality. The wired remote
is stored on the PPU-S’s handles with the hanger clip.
Adjustable and/or Removable Rise-Assist Handles
The rise-assist handles have been engineered to provide leverage for the seated party to assist in the process
of standing once they are up from the floor. The arms can swing away from the seat as needed. They are also
CAUTION
To Next Page
Loading...