Index Basic Servicemanual v 3.0
38
BOX 155 • S-954 23 GAMMELSTAD • SWEDEN • PHONE +46-920 203080 • TELEFAX +46-920 203085 • www.indexbraille.com • E-MAIL info@indexbraille.com
Fault detection
Fault Possible explanation Possible solution
My own tables Load them from a) copy “ownxx.s10” from old to new software
is not on the old software b) copy “owntab.evp” from old to new software
new software
Get latest Take it from our home a) click on the software you need and select if the
software page at: name and position is OK.
http://www.braille.se b) name BAXXXYYY.EXE where XXX is the
language, YYY is the version no.
c) Move the file (example baeng303.exe) to an empty
temporary directory (c:\temp)
d) Extract the file (example baeng303.exe) with the
command “baeng303.exe -d”.
This will extract the files and directories on TEMP
directory.
e) Delete source file (example baeng303.exe) on
the temp directory.
f) Run “install.exe”. This will install the software
on directory c:\Basic\ba303 and start up the
program to install on Basic.
g) Next time you start the program run “basic”
on c:\Basic\ba303 and follow the menu
instruction.
To Next Page
Loading...
