Index Basic Servicemanual v 3.0
39BOX 155 • S-954 23 GAMMELSTAD • SWEDEN • PHONE +46-920 203080 • TELEFAX +46-920 203085 • www.indexbraille.com • E-MAIL info@indexbraille.com
From Date Type SW Change Comments
ser.no
20763 4/4 –97 ME 3.01 Mounting of Print head motor Improved stability of motor.
SW bracket in aluminium extrusion
Bug fix Japanese interline 2.2 mm
20897 28/5-97 SW 3.02 Bug fix Speech feedback for handshake
Binding margin = 0
Letter graphic gave next printout in
graphic mode.
Increase torque on print head motor
20993 21/8-97 ME 3.10 Back plate with rubber rollers Solved the problem of paper
SW and sensor. movement during printout, causing
vertical misalignment.
Bug fix Japanese vertical alignment.
Note! When installing >3.10 software
set paper jam OFF if unit does not
have the new back plate with sensor.
Index recommend to update the unit
with new backplate.
21038 12/9-97 ME 3.12 Bigger fan in side panel. Improved cooling.
SW
New SW functions Automatic paper sensor at paper
edge. Setup/option/formfeed = on/off
gives an empty page before it start to
emboss.
Distance after file. 1 or 2. 1 is normal
and 2 is the settings for the acoustic
cabinet.
21077 22/8-97 ME 3.13 Bug fix Print out nonsens on first line.
SW Training mode removed.
New plastic spring (PH) Improved connection to the ball
bearing.
21281 14/2-98 ME Rubber axles based on a steel Improved printout quality
axle
3.14 Test version for Japan Never released
21506 29/5-98 SW 3.15 Bug fix Centronics communication on some
new laptops did not work.
21674 16/10-98 ME Transport locking with a steel Improved locking sequrity
axle.
21738 30/11-98 SW 3.16 Bug fix Loading Braille codes failed with
some computers – changed timing in
the program
21790 11/2-99 SW 3.17 Windows drivers for Basic
21917 29/3-99 SW 3.18 External ground for CPU Solved the problem with boards that
didn’t start up at all.
Bug fix A few units lost information in RAM.
21964 1/4 –99 SW 3.19 * Japanese pitch adjusted.
* Position for transportation locking
has been changed due to hardware
changes.
Units with older hardware must find
the position manually.
*Bug fix: in Split Page mode.
22230 1/9-99 SW 3.20 Bug fix When downloading single sided soft
ware version 3.19, every second page
disappeared in the printout.
This bug is now corrected.
Serial Number, dates & HW, SW and mechanical changes Basic D/S
To Next Page
Loading...
