27
Figure 13
Storage
Pocket
Installation
Booster Car Seat
Installing in Vehicle
IMPORTANT
!
• Tighten till slack is removed.
• In certain vehicles an extension strap
may be needed.
• Do not overtighten Top Tether strap.
• Ensure Top Tether strap is passed
through the Top Tether Strap Guide.
ADJUSTER
ATTACH
PULL TO
TIGHTEN
Pull to
Lengthen
Pull to Tighten
Figure 9Figure 3
CAUTION: CHILDREN CAN BE
INJURED OR RESTRAINTS AND
TOP TETHER STRAP DAMAGED
BY UNSECURED CARGO IN A
COLLISION. SECURE OR
REMOVE HAZARDOUS CARGO
BEFORE USING THIS CHILD
RESTRAINT.
Pull to tighten and remove all the slack, from
the top tether strap (refer to Figure 3). Do not
overtighten as this could cause the restraint to
lift off the vehicle seat.
Roll up and store the excess webbing from top
tether strap and store in the pocket provided
(refer Figure 4).
Step 4:
Step 5:
Tether Storage
After correctly installing the restraint in your car,
roll up and place any excess tether strap in the
storage pocket provided (refer Figure 4).
Always secure the loose end of the top
tether strap to prevent it hanging out of
the car or being accessible by the child.
To Next Page
Loading...
