Infasecure CS7313 - Adjusting the Headrest; Use

28
Use
Booster Car Seat
Lift the ap on the front of the headrest cover,
to expose the unlock/lock button.
Press the button to unlock the mechcanism.
Raise/Lower to achieve the correct headrest
position.
Release the button to lock the mechcanism
(refer to Figure 2).
Adjusting the headrest height to position the sash
guide near your child’s shoulders to enable the cars
seat belt sash to be in the correct position (refer
Figure 6)(see using Lap-Sash seat belt pages 29-31).
Step 1:
Step 2:
Adjusting the Headrest
The headrest can be adjusted to different heights,
to best suit your child. The headrest has a locking
button in the front.
IMPORTANT
!
You will need your child to sit in the booster to
determine the most appropriate headrest height.
Figure 2
Figure 1
Figure 3
The headrest height provides for;
- The sash guide position to ensure the vehicle seat
sash is correctly located.
- The protection of your child’s head during a side
impact.
Note:
With the child correctly sitting in the restraint, check
that the headrest is positioned just above the child’s
shoulders.
PRESS
RAISE/LOWER